I un-installed the game and tried to re-install it (been having the same problems as djdj, being unable to patch the game). However, during installation, a message flashed up saying:
"The following error occurred on the file C:\Program Files (x86)\Childish Things\International Cricket Captain 2010\Cricket.exe .
Access is denied.
(0x5)"
Ignoring this and continuing the installation results in me being told that I may not have the appropriate permissions to access the item, even when I run it as an administrator.
Any ideas?
Thanks
Announcement
Collapse
No announcement yet.
Version 10.18/10.19 Bug reports thread
Collapse
This is a sticky topic.
X
X
-
Thanks for the extra detail, I'll see if we can go about reproducing it and fixing the bug. With bugs like these, the more detail the better as they aren't easy to reproduce.
I'll get on to the overs in a day issue and see what we can do.
Leave a comment:
-
Originally posted by Sureshot View PostOvers in a day issue:
I agree that this needs sorting out to be more realistic, but it will have to be quite dynamic, which could make it quite difficult to get it right. It might not be something we get around to for 2011, but we'll have a chat about it.
I can't say it's something I particularly look at, but it does stand out a bit.
I think at the moment county teams play 96 overs in a day, test sides should be 90 but is invariably 80-85. Don't know what the Aussie states are required to play.
Originally posted by Sureshot View PostContract bug:
Is it possible the same thing is happening, but you're describing it differently, mattjp doesn't actually say the player disappears from squad immediately.
Enigma, does your player leave your squad as soon as you progress from sorting your own players out? Or is he leaving the squad a few rounds in to "domestic" negotiations?
Just trying to get as much information as possible, as it'll be a difficult one to reproduce.
Are you offering players below the amount they want? Any kind of link like that, maybe there is no pattern to it.
Well, as it works, first, I offer contracts to my existing players who've expired their contracts then I click "Continue", then some'll accept & others will warn about leaving, etc then I place bids for NEW players & change or keep the offers for existing ones who'd rejected, then I click "Continue", then sometimes this time (or the next round) some of my existing players will give me "that" message, I click OK & but they remain in my squad, their contract says "0 years" then I make other NEW bids, if any, & click "Continue" (obviously, I can't bid for "those" players for the moment as their original bids are gone & they're not yet in "Domstic Players" list) & I click "Continue" & NOW, they'll vanish & appear in "Domestic Players" list.
Yes, they're usually the ones that I've offered less than what they're asking for but the message in question does NOT appear for everyone who I've underbid for but only some of them while others might say "I'm going to Surrey or Durham" or whatever the case may be.Last edited by enigma; 02-28-2011, 03:35 PM.
Leave a comment:
-
Overs in a day issue:
I agree that this needs sorting out to be more realistic, but it will have to be quite dynamic, which could make it quite difficult to get it right. It might not be something we get around to for 2011, but we'll have a chat about it.
I can't say it's something I particularly look at, but it does stand out a bit.
I think at the moment county teams play 96 overs in a day, test sides should be 90 but is invariably 80-85. Don't know what the Aussie states are required to play.
Contract bug:
Is it possible the same thing is happening, but you're describing it differently, mattjp doesn't actually say the player disappears from squad immediately.
Enigma, does your player leave your squad as soon as you progress from sorting your own players out? Or is he leaving the squad a few rounds in to "domestic" negotiations?
Just trying to get as much information as possible, as it'll be a difficult one to reproduce.
Are you offering players below the amount they want? Any kind of link like that, maybe there is no pattern to it.
Leave a comment:
-
Originally posted by the_trademarc View PostNot sure if this has been posted yet but I haven't been on in yonks.
Was really stoked that the overs per day issue was fixed and we get 90 in a day and not the 100-110 in older versions. But then, every day is 90, without fail, without time allocated for innings changeover, 5 paceman, 2-3 spinners, etc.
Below is a perfect example:
The first screenshot shows my bowlers at the 80 over mark. I've used quick men for 66 overs, and the time remaining shows 28 minutes.
It is not physically possible for a team to bowl 10 overs in 28 minutes.
To prove so, I used my quicks with the new ball for the last 10 overs, and they ended up getting the 90 overs in the allocated 28 min. The second screenshot also shows wickets have fallen, thus causing further delay.
Now I know play can be extended by upto 30 minutes to allow for the completion of the overs, but shouldn't that be reflected in the game, as well as time made up for rain, bad light etc.? (30 min before play extra, and after)
And also, shouldn't the console be more dynamic so as to reflect if you've used 5 quicks or 3 spinners?
Just a pick up....
Althogh most people mightn't notice or care about it but due to this bug, after a few seasons, even ordinary bowlers end up with 4-wickets per FC & good Test bowlers end with 5-wickets per FC/Test or so due to match-time being prolonged which is very annoying; it also leads to less draws, not to mention it doesn't help the realism of the game.
Originally posted by mattjp View PostI've had a bug with negotiations that's happened a couple of times in my Essex game. I'm trying to re-negotiate a contract with an existing player, but after a few rejections the player says "I'm going elsewhere, Essex have offered me a better deal". He then disappears from my squad and doesn't appear on the list of uncontracted players either.but in these cases, unlike your experience, the player usually stays in my "current squad" window & under Contract, it says "0 years" while for all the others it says 1/2/3 years or overseas, etc but the player does eventually appear in the uncontracted players' in the next round.
Leave a comment:
-
I know we have an issue with the field editor and retired batsman, it's something I've mentioned before but not sure if it's for 2010, so we'll double check the code for retired batsman, obviously being an old version, it's not directly helpful, but could well be there.
Leave a comment:
-
Katich and Hughes open for Australia. After Hughes gets out and is replaced by Hussey, Katich is forced to retire hurt. He (Katich) then disappears from the partnership record. The first wicket partnership was between him and Hughes, and the second was between him (the "retired batsman"), Hussey and Jaques. But the game credits the first wicket partnership to Hughes and Hussey (including retired batsman's score).
This happened in ICC09. If it's been fixed already, that's great.
Leave a comment:
-
ok fixed the patch update just need to make the game widescreen on a laptop windows 7, any ideas
Leave a comment:
-
yes but how on earth do you turn off norton internet security 2010 firewall so i can download the patch?
Leave a comment:
-
Hey djdj,
I had the same problem and what i did was temporarily disable my firewall until i had installed the patch. once it is finished just put the firewall back up.
Leave a comment:
-
ok need help. Have re-installed the ICC 2010 game and selected 'internet game', however it loads upto 100% and then says 'connection failure' and the update could not be found. Have no internet connection problems, fully updated directx and all that etc. is it a firewall issue with norton? any ideas! cheers
Leave a comment:
-
Originally posted by Chewie View PostHe doesn't take up any room in your squad because every nationally contracted player adds another spot, so it doesn't really make a difference if he plays or not
Leave a comment:
-
Not a bug but two suggestions for improving the game.
- Make the Australian League final 5 days like the Sheffield Shield.
- Too many byes. I've seen full-time keepers go for up to 30 byes in a one day game.
Leave a comment:
-
I just bought the game and immediately went to 'internet game' to update to latest patch, however after it went to 100% it said 'the update could not be found' any ideas?
Leave a comment:
-
Originally posted by alexholowczak View PostJust bought the new game, and very impressed. (The last version I had was the original!) Playing with Worcestershire in England (whose team is so bad it's unbelievable), but just started a new game as Tasmania in Australia. Selecting my squad now - Ponting has retired from 20 over cricket (national and international). He's contracted by Australia, so he can only play 20 over cricket for Tasmania. But since he's retired from that, he can't play for Tasmania at all. Fine - so I tried to remove him from my squad. I'm then told that he's contracted by Australia and will remain in my squad for free. I don't want him to stay in my squad, because he can't actually play any games for me!
Is this a bug? Or in reality, would Ponting be consigned to the Tasmanian squad, even though he can't actually play for Tasmania? (Note, I haven't advanced past this point in an Australian domestic game before... I guess there's no "talk out of retirement" option at some point...)
Edit: I now have got past this point, and despite being told the Australian contracted players could only play T20, they're not playing first-class games...
Leave a comment:
Leave a comment: